Search found 7 matches

by Jintynut
Sun Oct 23, 2022 4:32 pm
Forum: Self Build Problems Forum
Topic: Cutting ICF forms
Replies: 0
Views: 1154

Cutting ICF forms

I have to cut accurately in half Nudura ICF forms along their lengths, the straight lengths are OK they come without their insert webs unassembled, however the corners are assembled permanently. I have a semihobbiest table saw 10" which would help, a wood hand or circular saw would tear the pol...
by Jintynut
Mon Jun 27, 2022 11:39 am
Forum: Brickwork and Blockwork Forum
Topic: Verticla dpc
Replies: 0
Views: 979

Verticla dpc

I have an ICF construction coming out of a hill, it has a waterproofed retaining up one level the construction is designed with an outer brick skin which is knitted into another retaining wall to it's side so that they support each other. How do you put in a vertical dpc where the brick skin extends...
by Jintynut
Thu Apr 21, 2022 10:12 am
Forum: Carpentry and Joinery Forum
Topic: Workmate problem with replacing table
Replies: 2
Views: 1198

Re: Workmate problem with replacing table

I been to a couple of those spares sites, however I don't know which model number I have the label was destroyed long ago. I have been able to identify it by a critical path process which it describes it as type 8, there are 9, but the sites only go up to type 5 I think. I vaguely recall there are 2...
by Jintynut
Tue Apr 19, 2022 2:22 pm
Forum: Concreting, Drives, Paths and Patios Forum
Topic: Making a Garage Pit Watertight
Replies: 5
Views: 1382

Re: Making a Garage Pit Watertight

Thank you Stoneyboy, If the latex or bituminous were allowed to cure or just before either go off the concrete is poured will that seal, the pit walls and floor were constructed using a waterproofing additive, the water-table drops quickly during dry weather.

Bert
by Jintynut
Mon Apr 18, 2022 5:14 pm
Forum: Carpentry and Joinery Forum
Topic: Workmate problem with replacing table
Replies: 2
Views: 1198

Workmate problem with replacing table

I want to replace the table on an old workmate but can't identify which one it is, when I bought it there just 2 cantilever types now there seem to be 1/2 dozen.

Bert
by Jintynut
Mon Apr 18, 2022 5:07 pm
Forum: Concreting, Drives, Paths and Patios Forum
Topic: Making a Garage Pit Watertight
Replies: 5
Views: 1382

Re: Making a Garage Pit Watertight

I was hoping to coat the old surface with something like latex or a bituminous product and while it's still wet pour in concrete.

Bert
by Jintynut
Sat Apr 16, 2022 1:43 pm
Forum: Concreting, Drives, Paths and Patios Forum
Topic: Making a Garage Pit Watertight
Replies: 5
Views: 1382

Making a Garage Pit Watertight

I put a pit into my garage, under construction I ran out of concrete it wasn't possible to calculate properly due large boulders in the clay which had to come out, I returned to it a couple days later to complete. However due to high water table outside, as high as the floor surface, rainwater comes...
It is currently Sun Jun 23, 2024 9:53 pm