Main navigation


Search found 10 matches

  Go to advanced search
by Craigslist
Thu Jul 11, 2024 11:53 am
Forum: Bathrooms, Drainage and Waste Plumbing Forum
Topic: “Very concealed” toilet cistern problem
Replies: 2
Views: 322

Re: “Very concealed” toilet cistern problem

Thanks. Push button is fine. (Resistance when holes covered etc) Have bought new flush unit and about to fit that.

Regards
by Craigslist
Fri Jul 05, 2024 3:37 pm
Forum: Bathrooms, Drainage and Waste Plumbing Forum
Topic: “Very concealed” toilet cistern problem
Replies: 2
Views: 322

“Very concealed” toilet cistern problem

Hi We have concealed cistern. V concealed, so no access panel. (Fitter said “they never fail” when installing 20 years ago) I need to access as we have a problem with pneumatic push button. (Only central button works, and then makes a dull thud while flushing) I know I’ll have to wreck it a bit to g...
by Craigslist
Thu Oct 12, 2023 10:27 pm
Forum: Glazing and Double Glazing Forum
Topic: Hinge type and adjustment process?
Replies: 10
Views: 880

Re: Hinge type and adjustment process?

Hi again.

Many thanks.
by Craigslist
Thu Oct 12, 2023 7:44 pm
Forum: Glazing and Double Glazing Forum
Topic: Hinge type and adjustment process?
Replies: 10
Views: 880

Re: Hinge type and adjustment process?

Final one, showing my 30 year old multi lock.

Thanks
by Craigslist
Thu Oct 12, 2023 7:43 pm
Forum: Glazing and Double Glazing Forum
Topic: Hinge type and adjustment process?
Replies: 10
Views: 880

Re: Hinge type and adjustment process?

Second image, showing roller in partially locked position.
by Craigslist
Thu Oct 12, 2023 7:40 pm
Forum: Glazing and Double Glazing Forum
Topic: Hinge type and adjustment process?
Replies: 10
Views: 880

Re: Hinge type and adjustment process?

Hi again Quick update. Have now established Iocking problem due to multi lock not door position. Ie it sticks whether door in closed or open position. I’ve added some photos to show the roller lock in the open and closed positions. You can see gap under roller where mechanism not fully closing, (if ...
by Craigslist
Fri Oct 06, 2023 10:09 pm
Forum: Glazing and Double Glazing Forum
Topic: Hinge type and adjustment process?
Replies: 10
Views: 880

Re: Hinge type and adjustment process?

Thanks again
by Craigslist
Fri Oct 06, 2023 5:34 pm
Forum: Glazing and Double Glazing Forum
Topic: Hinge type and adjustment process?
Replies: 10
Views: 880

Re: Hinge type and adjustment process?

Hi May I ask a follow up on this? My three hinges have Allen bolts at side and underneath each hinge. Am I right in thinking I need to adjust the side screw on each hinge to adjust laterally? (Clockwise or anti clockwise?) I’ve also attached an image of door showing clearly the lack of alignment at ...
by Craigslist
Wed Oct 04, 2023 6:05 pm
Forum: Glazing and Double Glazing Forum
Topic: Hinge type and adjustment process?
Replies: 10
Views: 880

Re: Hinge type and adjustment process?

Ok many thanks.
by Craigslist
Mon Oct 02, 2023 9:12 pm
Forum: Glazing and Double Glazing Forum
Topic: Hinge type and adjustment process?
Replies: 10
Views: 880

Hinge type and adjustment process?

All Our front and back doors were fitted about 25 years ago. Unfortunately, they both now have similar issue. The door handle is extremelyu stiff when closing in door frame. (Last few inches) The problem doesn’t present when trying same movement with door open, so it’s definitely a door adjustment i...
It is currently Mon Dec 02, 2024 9:34 am
Go to advanced search