Main navigation


Search found 7 matches

  Go to advanced search
by Pglen
Tue Mar 22, 2011 4:12 pm
Forum: Electrics Forum
Topic: Combining 2 radials into one
Replies: 2
Views: 2897

Combining 2 radials into one

As part of a kitchen make-over I'd like to replace the 2 circuits I have (one for hob and one for oven) with a single one. The current set up is that each circuit has a 6mm cable from a two separate MCBs to two CCUs - is there any reasons why I cannot combine these into the one MCB and the one CCU, ...
by Pglen
Thu Nov 05, 2009 7:49 pm
Forum: Electrics Forum
Topic: Timer switch for 25A load
Replies: 1
Views: 2450

Timer switch for 25A load

Does anyone know where I can get a timer switch for a 25A load (it's a heater)?

thanks

P
by Pglen
Mon Mar 09, 2009 9:11 pm
Forum: Concreting, Drives, Paths and Patios Forum
Topic: What concrete thickness to support therapy pool
Replies: 1
Views: 3420

What concrete thickness to support therapy pool

We're having a therapy pool installed in our garage, the concrete is 4" thickness, the pool is 14ft by 8ft by 3.5ft deep (roughly 10 tonnes of water when filled). The pool is basically a liner supported by steel frame sides - does this sound ok? I need to anchor the sides into the floor using 3...
by Pglen
Tue Jan 13, 2009 10:05 am
Forum: Electrics Forum
Topic: SELV lighting in zone 1
Replies: 4
Views: 3670

SELV lighting in zone 1

I am having lights fitted above a hydrotherapy pool. The leccy is siting the transformers next to the lights in the ceiling which is 2.4m. I understood that zone 1 is limited by a horizontal plane 2.5m above the height of the pool surface. I had asked for the transformers to be placed in another roo...
by Pglen
Tue Nov 11, 2008 4:17 pm
Forum: Electrics Forum
Topic: Do I need earth bonding?
Replies: 2
Views: 3293

Do I need earth bonding?

I have a bathroom with absolutely no electrics (no lights etc), gavity fed shower, radiator, bath, sink - does it require bonding and if so why?

Would it make a difference if I had SELV lighting?

thanks

Pete
by Pglen
Fri Jun 20, 2008 11:19 am
Forum: Electrics Forum
Topic: Outside placement of electrics
Replies: 5
Views: 3580

Thanks for the reply Eric - but now you have me worried. I'm happy that I can get someone to do (and more importantly certify, it's a conversion and building regs are involved) the outside electrics which is probably quite straightforward but what worries me now is the earthing in the room. From wha...
by Pglen
Thu Jun 19, 2008 5:42 pm
Forum: Electrics Forum
Topic: Outside placement of electrics
Replies: 5
Views: 3580

Outside placement of electrics

I am having a hydrotherapy pool installed and for safety would prefer that the electrics are installed outside of the room in which it will sit. My ideal location is to place them (ie heater, filter and pump unit) in a secure weatherproof box outside the house and have it connected to the consumer u...
It is currently Wed Dec 04, 2024 9:21 am
Go to advanced search