Search found 8 matches

by beanie
Tue Aug 26, 2008 11:11 pm
Forum: Central Heating and Air conditioning and Ventilation Forum
Topic: adey magnaclean removing iron oxide
Replies: 4
Views: 5695

cheers that sounds good advice, i'll give it a go, do you think its worth fitting the adey magnaclean filter to the system to help clean it out.
found one for £100.
by beanie
Mon Aug 25, 2008 10:14 pm
Forum: Central Heating and Air conditioning and Ventilation Forum
Topic: adey magnaclean removing iron oxide
Replies: 4
Views: 5695

adey magnaclean removing iron oxide

my boiler cycles on and off every 30secs on hot water and central heating, had british gas out to look at it and they reckon its because the system is blocked with iron oxide in the pipes, causing a restriction in flow. He recomended a £600 ish clean of the system with a presure tool. i was thinking...
by beanie
Sat Jan 26, 2008 6:01 pm
Forum: Central Heating and Air conditioning and Ventilation Forum
Topic: boiler cycleing every 30 secs
Replies: 5
Views: 4378

yeah it was the same before the service. fitted a new temp sensor stat today (goes on the outlet water pipe on the left hand side, the higher of the two) clips to the water pipe one end and is the boiler controls the other end. But its still the same. :cry: any idea were on the net i can get the man...
by beanie
Sun Nov 18, 2007 9:59 pm
Forum: Central Heating and Air conditioning and Ventilation Forum
Topic: boiler cycleing every 30 secs
Replies: 5
Views: 4378

boiler cycleing every 30 secs

please help, my "british gas f2" potterton boiler keeps cycleing every 30 secs or so. central heating~ from cold the boiler will stay on fine untill the return pipe to boiler is up to temp (all rads warm) then will cut out as it should. now the problem starts as the boiler will turn on for...
by beanie
Fri May 04, 2007 9:39 pm
Forum: Masonry Forum
Topic: Mortar problems
Replies: 2
Views: 5098

thanx for the reply,
i was worried about it causing weakness in the garage or structual proplems, especially as its deep in places.
does repionting add strengh or just wheather protection?
by beanie
Fri May 04, 2007 9:33 pm
Forum: Central Heating and Air conditioning and Ventilation Forum
Topic: Radiators become hot at the 'hot water only setting'.
Replies: 8
Views: 6658

na it was easy, i only watched but the top soliniod part was only cliped or screwed on to the T section which has the valve in. on my one there is no chance of it leaking, the water stays in the T section of pipe, there is a little lever that pokes out and the soliniod part moves the lever. the soli...
by beanie
Wed May 02, 2007 8:29 pm
Forum: Central Heating and Air conditioning and Ventilation Forum
Topic: Radiators become hot at the 'hot water only setting'.
Replies: 8
Views: 6658

i had a similer prob just not as bad my heating engineer showed me were the 3 way valve was and he took the top (stepper motor/soliniod) part off and freed up the valve part which can stick, it was very easy to do and i,d be able to do it next time. as i understand it the hot water comes up a pipe f...
by beanie
Wed May 02, 2007 8:13 pm
Forum: Masonry Forum
Topic: Mortar problems
Replies: 2
Views: 5098

Mortar problems

Hi in my garage i have noticed some of the mortar has turned to a sandy consistency which when i poke it with my finger or screw driver just falls out, leaving a hole between the bricks. In one place i can see a pin hole size of daylight were the mortar has turned sandy and fell out. To me this soun...
It is currently Thu Sep 19, 2024 10:47 pm