DIY Doctor UK DIY Forums

johnny1001

Hi Rosebery, Just been up in the roof to measure my cold water tank it is a round plastic one and measures 83cm /33 inches X 61cm / 24 inches tall, I think this about a 50 gallon tank. Thanks again for all your help much appreciated and if you are ever in Cornwall drop in and have a shower. Many tha...

johnny1001

Hi Rosebery, Thanks for coming back so prompted, As I have a 22mm at the side off the cylinder I will use it, Just thought that being 7 inches down the side will I get the full amount of hot, will it also pull hot water from between the 7 inch outlet and the top of the cylinder or will just pull hot...

johnny1001

Thanks rosebery & chris_on_tour2002 Is it easy to fit a surrey, warix or ******* flange and how do I go about it, as I have not fitted one before I have a fully lagged HW Cylinder. About 180mm / 7 inches from the top of the Cylinder is capped off 22mm outlet, could this be an alternative connect...

johnny1001

Hi Rosebery
Thanks for your reply, Can I Tee of from the 22mm pipe at the top of the hw cylider reduce to 15mm to the hot side of the pump? The 15mm feed does come from the CWST in the roof so thats no problem. Johnny.

johnny1001

I am installing a new shower, I have stuart tuner duel pump 2.6 bar a mira thermastatic shower at the moment the system is gravity fed with a cold water in the roof and hot cylinder on first floor level. What I would like to know is: Do I need a separate hot feed or can I use the existing 22mm bath/...

Project Type A - E

Project Type F - G

Project Type G - J

Project Type M - P

Project Type R - T

Useful Tips

Search found 5 matches

Gavity fed/ pump shower

Main navigation

Search found 5 matches

Gavity fed/ pump shower