Search found 4 matches

by Emulated
Sat Jun 12, 2010 2:11 pm
Forum: Electrics Forum
Topic: Split Load Consumer Unit.
Replies: 3
Views: 4146

Does that answer your question? you asked. More than answer it and I will need to read it several times to grasp it all. Therefore many thanks for your input and I will see if the electrician who fitted the CU is still available to sort it out for me.
by Emulated
Sat Jun 12, 2010 2:06 pm
Forum: Central Heating and Air conditioning and Ventilation Forum
Topic: Potterton Kingfisher MF
Replies: 3
Views: 5373

Many thanks. Maybe the service man failed to understand the problem and simply fitted a new temperature control. I will ask him to recall and see how it goes. You need an RGI to check and adjust pilot, once the appliance is warm there's a better pull on the flue, a dirty or poor pilot the gas is pul...
by Emulated
Fri Jun 11, 2010 4:26 pm
Forum: Central Heating and Air conditioning and Ventilation Forum
Topic: Potterton Kingfisher MF
Replies: 3
Views: 5373

Potterton Kingfisher MF

My Potterton Kingfisher MF fires instanly on initial start up but once it has done a cycle of heating the hot water and whilst the boiler is still warm the relay clicks about 5 times and it takes several goes to fire up. I had the thermostat replaced but it made no difference.
by Emulated
Fri Jun 11, 2010 4:19 pm
Forum: Electrics Forum
Topic: Split Load Consumer Unit.
Replies: 3
Views: 4146

Split Load Consumer Unit.

I had a new consumer unit fitted about 5 years ago with just a d/p mains switch and mcb's. My outside sockets of around the same age are wired into a seperate mcb but with no rcd trip protection. This means I have to use a plug in rcd everytime I use an outside socket. I have broken 2 from dropping ...
It is currently Tue May 14, 2024 10:47 am