Search found 18 matches

by Brickworkz
Wed Aug 17, 2011 12:12 pm
Forum: Gas and Gas Fitting Forum
Topic: What pipe?
Replies: 1
Views: 2494

Looks like gas.
by Brickworkz
Wed Aug 17, 2011 12:10 pm
Forum: Gas and Gas Fitting Forum
Topic: No gas to cooker???
Replies: 1
Views: 2605

Maybe a silly question but is the ignition (electrics) connected as on some models, the gas safety valve will not activate unless there is an ignition.
by Brickworkz
Wed Aug 17, 2011 12:01 pm
Forum: Central Heating and Air conditioning and Ventilation Forum
Topic: Extraction problem - second hand smoke entering property
Replies: 2
Views: 2750

These type of properties used to be fitted with an open vent so you should be able to find a suitable replacement that also works as a shut off.

When the building extraction system is running then the vent will open and when it is off, it will close automatically due to no draw.
by Brickworkz
Wed Aug 17, 2011 11:49 am
Forum: Plumbing Forum
Topic: Locating best place to plumb water from and how
Replies: 1
Views: 2279

Down to preference really but I for one am not keep on seeing piping or cabling on the exterior of buildings. There are also the winter months to think about where frost can get at it. If you feel that your best option is from the kitchen then maybe you could have a look at using plastic pipe and tr...
by Brickworkz
Tue Aug 16, 2011 12:03 pm
Forum: Plastering and Dry Lining Forum
Topic: Cold outside wall
Replies: 7
Views: 3514

Depending on the age of the building and type of plaster, you could use a breathable membrane, battens then foiled back plaster board. Maybe worth seeking advice from a builder etc prior to starting.
by Brickworkz
Tue Aug 16, 2011 11:24 am
Forum: Brickwork and Blockwork Forum
Topic: Converting old fireplace to cooker housing
Replies: 4
Views: 13521

As recommended, I would seek the advice of a builder and one who has been in the trade for some time as if you are referring to the slab being at the top of the fireplace and within the chimney breast, this would have been cast on site into the internal brickwork and would contain the clay flu pipe....
by Brickworkz
Thu Aug 04, 2011 10:51 pm
Forum: Barn Conversions Forum
Topic: Dry Lining an interior flint wall
Replies: 3
Views: 5728

Hi Elizabeth,

The wall needs to breath so it would be the DPM first or coat the wall with a breatherable sealer.

You can then insulate then use the polythene or foiled backed plasterboard.
by Brickworkz
Thu Aug 04, 2011 9:08 am
Forum: Plastering and Dry Lining Forum
Topic: Bathroom coving
Replies: 5
Views: 9583

Not something I have ever tried personally but on first thoughts, due to the finish on the tiles, the adhesive would not bond. If it were something that I would attempt, I would personally use the coving adhesive on the ceiling edge and try a bonding agent such as 'no nails' on the tiled edge. If yo...
by Brickworkz
Wed Aug 03, 2011 7:55 pm
Forum: Carpentry and Joinery Forum
Topic: Lowered Ceiling, but are joists, hangers/bolts up to load??
Replies: 3
Views: 9023

The only thing I would add is cross bracing in between the new joists to help prevent movement and fixings to the original joists to help prevent sagging.
by Brickworkz
Wed Aug 03, 2011 3:05 pm
Forum: Masonry Forum
Topic: Exterior walls
Replies: 2
Views: 3544

Although sand blasting may be an option, care should be taken prior to any work be carried out. Chances are that the stonework was originally painted due to the stone becoming discoloured from the weathering effect and as such, the weathering effect could have also changed the stones density. As men...
by Brickworkz
Wed Aug 03, 2011 2:06 pm
Forum: Roofing Repair and Construction Forum
Topic: Conservatory flashing - what lead grade
Replies: 2
Views: 3334

Hope this helps:

Google "centuriondiyconservatories.com/files/Conservatory-Lead-Flashing.pdf"
by Brickworkz
Wed Aug 03, 2011 2:02 pm
Forum: Landscaping
Topic: removing red wine from indian sandstone
Replies: 2
Views: 5095

As you will now be aware, sandstone is very absorbent so care should be taken when attempting to remove stains as more damage can be done than harm. There are many products out there on the market however choosing the correct one can be an art in itself. We are in the business of carrying out such w...
by Brickworkz
Wed Aug 03, 2011 1:27 pm
Forum: Conservatories and Orangeries Forum
Topic: painting polycarbonate roof sheets internally
Replies: 1
Views: 10183

Maybe of interest:

Google "ronseal.co.uk/products/stay-white-upvc-paint"
by Brickworkz
Wed Aug 03, 2011 1:05 pm
Forum: Bathrooms, Drainage and Waste Plumbing Forum
Topic: bath sealing
Replies: 1
Views: 2384

There are a few solutions you can look at but the answer depends on why there are gaps in the first place. If the bath is touching the walls in places then the walls must be out of true. If not then look at what is preventing the bath from going right back to the walls. Maybe the bath supports under...
by Brickworkz
Wed Aug 03, 2011 12:35 pm
Forum: Bathrooms, Drainage and Waste Plumbing Forum
Topic: blue toilet water (toilet duck) coming from bathroom taps
Replies: 1
Views: 3033

Trial and error so the first port of call would be to find which tap it is coming from i.e hot or cold. If it is only the bathroom tap then chances are it will be the tap at the end of the water feed so your question then is, what is in between that tap and the one on the feed before. Is it a new in...
It is currently Mon Dec 09, 2024 7:12 pm