Main navigation


Search found 7 matches

  Go to advanced search
by learningallthetime
Sat Jan 28, 2012 10:53 pm
Forum: Plumbing Forum
Topic: 22mm female cylinder connector
Replies: 5
Views: 4120

Re: 22mm female cylinder connector

Thanks very much for your help.
by learningallthetime
Sat Jan 28, 2012 7:57 am
Forum: Plumbing Forum
Topic: 22mm female cylinder connector
Replies: 5
Views: 4120

Re: 22mm female cylinder connector

The tank is a Gledhill tank and I've checked the thread with a 22mm nut. Is it a case of feeding a length of 22mm copper into tank connector, putting an olive on and tightening it all up?

Thanks for the help.
by learningallthetime
Fri Jan 27, 2012 7:18 pm
Forum: Plumbing Forum
Topic: 22mm female cylinder connector
Replies: 5
Views: 4120

22mm female cylinder connector

I'm struggling to find a connector for my solar panel hot water cylinder secondary indirect coil. The coil has a 22mm male connector sticking through the insulation. Ideally I would like a 22mm elbow female connector that connects to the cylinder and at the other end a 22mm connector that allows me ...
by learningallthetime
Thu Jan 12, 2012 10:39 pm
Forum: Central Heating and Air conditioning and Ventilation Forum
Topic: Combi Bolier with Hot Water Cylinder - Any help appreciated
Replies: 7
Views: 5308

Re: Combi Bolier with Hot Water Cylinder - Any help apprecia

Just tried testing something... There is a tap fitted to the boiler where you can draw hot water. Its pretty pointless as its just a tap in the boiler cupboard. However, I turned it on (with the hot water turned off) and initially the water was warm i.e. first litre or so (presumably just a result o...
by learningallthetime
Thu Jan 12, 2012 10:17 pm
Forum: Central Heating and Air conditioning and Ventilation Forum
Topic: Combi Bolier with Hot Water Cylinder - Any help appreciated
Replies: 7
Views: 5308

Re: Combi Bolier with Hot Water Cylinder - Any help apprecia

Hi sparx, Thanks for the feedback. Since my last reply I was researching the DT20 a little more and came across the same thing that the programmer can only be used with a diverter valve (although I don't understand what it does). The programmer physically installed matches the picture in the manual ...
by learningallthetime
Thu Jan 12, 2012 8:41 pm
Forum: Central Heating and Air conditioning and Ventilation Forum
Topic: Combi Bolier with Hot Water Cylinder - Any help appreciated
Replies: 7
Views: 5308

Re: Combi Bolier with Hot Water Cylinder - Any help apprecia

Thanks for the information sparx. A bit more Googling and I was thinking a S Plan for 2, 2 port valves might work. Would this be better than a Y plan option? If so, could you explain why just so I understand. Also would they need to be the "normally closed" option rather than "normall...
by learningallthetime
Sat Jan 07, 2012 11:43 am
Forum: Central Heating and Air conditioning and Ventilation Forum
Topic: Combi Bolier with Hot Water Cylinder - Any help appreciated
Replies: 7
Views: 5308

Combi Bolier with Hot Water Cylinder - Any help appreciated

We have an interesting setup in our house that we recently purchased and some help/advice would be much appreciated. We have a Worcester Bosch 24i Combi boiler that is currently used for the central heating system. The boiler has the programmer fitted to allow heating to be preset for time/days. We ...
It is currently Fri Nov 29, 2024 9:39 pm
Go to advanced search