Main navigation


Search found 3 matches

  Go to advanced search
by dents12
Thu Jan 05, 2017 7:05 pm
Forum: Electrics Forum
Topic: Power to Garage and two Sheds Using Old Consumer Unit
Replies: 7
Views: 15793

Re: Power to Garage and two Sheds Using Old Consumer Unit

If fed from a MCB or RCBO in house consumer unit as long as they are selected to match the existing cable, then yes you can do it that way. If fed from a Henley block before the consumer unit then the cable must match the supply fuse so likely 16mm or 25mm so bit on the expensive side. Its an old c...
by dents12
Tue Jan 03, 2017 10:29 pm
Forum: Electrics Forum
Topic: Power to Garage and two Sheds Using Old Consumer Unit
Replies: 7
Views: 15793

Re: Power to Garage and two Sheds Using Old Consumer Unit

[quote="collectors"]A little bit over kill, but if you have the room i would put two split load boards in with the amount of outside stuff you are fitting. /quote] So i could have one for my house and the other one in my Detached garage .that could feed the sheds i plan to have built later...
by dents12
Mon Jan 02, 2017 3:08 pm
Forum: Electrics Forum
Topic: Power to Garage and two Sheds Using Old Consumer Unit
Replies: 7
Views: 15793

Power to Garage and two Sheds Using Old Consumer Unit

Good afternoon. I will be getting some quotes for some electrical work soon and your advice and views on the best installation would be appreciated. I have an old (must be 30 yrs old ) consumer unit in the house with 6 fuses and also switch box 100amp ,,this is for the cooker and hob,which comes fro...
It is currently Sun Jan 12, 2025 1:54 pm
Go to advanced search