DIY Doctor UK DIY Forums

Mr White

To change the size of pictures you should use a picture resizer, lots of free one available, (Your computer may have one already in your photo viewer) but in your case it would be a waste of time as most radiators have no markings. You need a heating engineer to service/maintain your boiler and radi...

Mr White

The plug and socket you have are NOT compatible, they are desigend not to fit for a reason. Blue accesories are used on 240V ac Yellow accesories are used on110V ac Have a look for the power rating plate on your table saw and see what that says the voltage is that it runs at (Or take a picture and p...

Mr White

I would look to curing the cause, not trying to "cover it up"

Mr White

Have you looked in the cistern? What happens if you take a sample of water and leave it (in a glass) on a shelf? Try the same with the hand basin.

Mr White

The toilet bowl is the only place you would expect to see water from the "mains" standing in the open for a few hours, so I wonder, fill a glass from the handbasin, leave it to stand for a few hours, what happens? It may be nothing to do with the toilet.

Mr White

You don't want to connect to the wrong pipe, call a specialist septic tank pumping company and ask them to come and look. (Septic tanks must be pumped out every few years.)

Mr White

Carry on with your idea then. I do note, most "smart switches" require a back box of 35mm, the average lighting back box is 16 mm, you may be lucky and have a 25mm box, but you can get "extenders" instead of changing the back box. I have been perusing several smart switches and n...

Mr White

What you have is called 2 way switching. (If the three switches you mention control the same light or lights at the same time, you have 2 way and intermediate) There is no such thing as a smart 2 way switch. (Or two-way and intermediate) You would have to change all 3 switches at the same time to co...

Mr White

(Lighting is not a ring main) In your case, you have to provide your own terminal. Put it in a wago or a single connector block. Do NOT cut it off.

Mr White

Sofit vents. You may already have them, but they could be blocked with all that glass fibre insulation you have. You will have to have a look.
The other thing is, where is all the damp air coming from? Lofts are usually cold and windy.

Mr White

It is probably condensation, there should be ventilation in your loft, vents in the eves at least.

Mr White

As you said it depends on the weather where you are, since I am not there I do not know what the conditions are, the longer you leave it the better it will be.

Mr White

Utility knife

Mr White

I searched and I found videos of how to programme your programmer dating back 12 years ago, so yes the design is old, but you can still buy them today.

Mr White

You can add a bath to a wet room, but it is not possible to see from this end of a keyboard, I suggest you get a bathroom fitter to come round and have a look. Don't be surprised if he says most of it will have to come out.

Project Type A - E

Project Type F - G

Project Type G - J

Project Type M - P

Project Type R - T

Useful Tips

Search found 1333 matches

Re: New property acquired

Re: Power tool - how to properly connect to mains?

Re: Damp/mould around windows area

Re: Toilet water

Re: Concealed Toilet - Discolored Water

Re: Connection to septic tank - a bit of help please!

Re: Replacing a wall-switch with a smart switch

Re: Replacing a wall-switch with a smart switch

Re: Earthing a ceiling light?

Re: Condensation in loft ?

Re: Condensation in loft ?

Re: How long for plaster to fully dry before painting

Re: Cutting LVT flooring along the skirting which has a stud wall built on it.

Re: Honeywell ST9400C 7 Day Programmer

Re: Turning current wetroom into a bathroom

Main navigation

Search found 1333 matches