I have a new problem for everyone. I want to replace a 3 gang light switch.
Currently set up is
L2---L3 -L1- L2---L3
-L1- L2---L3 -L1-
L1 left bottom relates to L2 and L3 top left, L1 top middle relates to L2 and L3 bottom middle, L1 bottom right relates to L2 and L3 right top
The top row are connected from the same output "red wire". L2 on the left is connected to L1 in middle and L2 on right.
The bottom row is yellow with red band on left L1, blue with red band on L2 middle and red on L1 right side.
The black wire associated with main outpur powering lower part of diagram has been taped off.
Now I have bought a new switch which is laid out as follows
L L1 L2 L
L1 L2 L L1 L2
L left top is related to L1 and L2, L middle bottom is related to L1 and L2 top middle, L right top is related to L1 and L2 bottom right
Please could someone answer where do the wires go on the new switch?