Odd CH system problem
All aspects of plumbing questions and answers, help, tips and information

5 posts   •   Page 1 of 1
dormermike
Apprentice
Apprentice
Posts: 20
Joined: Tue Sep 07, 2010 1:12 pm

Odd CH system problem

by dormermike » Fri Nov 12, 2010 11:53 pm

On two occasions we've left our heating + hot water system switched off whilst going on holiday (a week each time) and on both times when the heating has been switched back on, the water tank (main one) has overflowed abrubtely... spitting the water out of the external overflow.

I'm just curious why this would happen? Is it normal?

Also we keep getting a air lock in the hot water tab in the kitchen which is furthest hot water tap from the hot water tank. The other hot water taps have no problem. Could this mean a leak or just poorly routed pipework to kitchen?

Thanks
Mike

stoneyboy
Project Manager
Project Manager
Posts: 6534
Joined: Wed Dec 10, 2008 6:44 pm

by stoneyboy » Sun Nov 14, 2010 10:08 pm

dormermike,
Try adjusting the ball valve in the CWT so the water level is lower.
Your kitchen tap could be drawing air into the pipework from the vent pipe. If you have an IV on the kitchen tap try restricting the flow from the tap by partly closing the IV.
end

dormermike
Apprentice
Apprentice
Posts: 20
Joined: Tue Sep 07, 2010 1:12 pm

by dormermike » Mon Nov 15, 2010 8:02 pm

Thanks - will try that

Whats an IV?

Dave From Leeds
Ganger
Ganger
Posts: 179
Joined: Mon Nov 19, 2007 9:02 pm

by Dave From Leeds » Wed Nov 17, 2010 1:56 am

[quote="dormermike"]Thanks - will try that

Whats an IV?[/quote]

An IV is an isolator valve.

dormermike
Apprentice
Apprentice
Posts: 20
Joined: Tue Sep 07, 2010 1:12 pm

by dormermike » Sat Nov 20, 2010 1:54 pm

OK Thanks

I've put a new ball valve on the water tank, and set it so the stored water level is lower.

Cheers.

5 posts   •   Page 1 of 1
It is currently Fri Nov 22, 2024 2:17 am