Page 1 of 1
Cutting shiny laminate kickboards
Posted: Wed Jul 23, 2008 1:31 pm
by juanaseech
Hi all. Am new here! Just want to know the best way to cut highly shiny, laminate covered kickboards. I have a jigsaw but I have a feeling it'll splinter/crack the laminate coating. I've heard there's a special type of jigsaw blade to use but I don't know the name of it. Any ideas
Many thanks in advance
Posted: Wed Jul 23, 2008 9:22 pm
by Freeman
The jigsaw blade you refer to is a down cutting blade i.e. it cuts on the down stroke not the up stroke. Cover the sole plate of the jigsaw with adhesive tape to prevent scratching the shiny surface or cut from the back using a fine toothed conventional blade.
Posted: Thu Jul 24, 2008 5:01 pm
by Tim Swingler
I would personnel cut the kicker boards with a handsaw. This will ensure that you don’t split the laminate out.