Page 1 of 1
Which saw should I use
Posted: Tue Oct 28, 2008 12:02 pm
by L&A
Hi, I am cutting the bottom off a pine exterior door and after reading your cutting timber project I am about to buy a new saw; but on looking I am confused about all the different types of saw are available. What do they do and which should I buy?
Re: Which saw should I use
Posted: Tue Oct 28, 2008 6:51 pm
by CHIPPY2158
[quote="L&A"]Hi, I am cutting the bottom off a pine exterior door and after reading your cutting timber project I am about to buy a new saw; but on looking I am confused about all the different types of saw are available. What do they do and which should I buy?[/quote]
when cutting the bottom of a door i always sit on across two timber benches cover with a old rag or even the plastic door cover to stop the benches marking the door! the i mark what needs to be cut off! then run a stanley knife along the line both sides to stop the cut from chipping on either face!
and you can cut it either by hand witch is what i prefer or use a circular saw! but depends on the thickness of the door ! some external doors can be 52mm plus thick! so if u by a circular make sure id cuts deep enfuff!
then plain the egde to remove tha harris and sand the cut! job jobbed hope that helps
Posted: Tue Oct 28, 2008 7:22 pm
by chris_on_tour2002
your best bet is a circular saw - make sure you learn how to use it first! potentially a very dangerous machine. otherwise just do it with a normal hand saw.
too many saws out there to describe what they all do here! if you want to ask specific questions about specific machines i'd be happy to help.