DIY Doctor UK DIY Forums

I want to build some book shelves around a corner of my sitting room. Both sides of the corner will be around 90cm and both walls are masonary walls. The height of the unit will be about 2.5m

I'm just wondering how best to consruct and support the shelves, should they be all one piece of timber going around the corner? How do I provide additional support half way around? Or are 3 separate units the way forward - 1 on each side and a free standing one at an angle across the corner?

Any suggestions welcome

TomA,
Suggest you screw mouldings to the 2 walls at just below the height of the shelves, Fit a full width piece of timber or faced chipboard to one side and then a shorter piece to the other - use a couple of dowels where the two shelves meet.
end

Last year 64% of the questions asked in our forum were answered within our DIY project pages at www.diydoctor.org.uk/projects.htm The project pages are now separated alphabetically and your answers are accompanied by diagrams and the ability to see, and buy, the tools and/or required to complete your project. Use our search box to look for your answer and save a great deal of time and money!