30 mm Furniture Panels for Custom Built Desk
Posted: Tue Nov 19, 2019 7:17 pm
Hi everyone,
I'm new to the forum so my apologies if I would have missed something obvious.
I'd like to build a custom desk with a length of 2400 mm with 4 legs on the corners, so to avoid it from bending under load I'd need the furniture panel to be at least 25 mm but preferably 30 mm thick.
I already saw panels like these at B&Q a few months ago, they were longer than 2400 mm, 600 mm wide, and 30 mm thick. Unfortunately, I can't find them on the B&Q website anymore, and also had no luck finding similar panels on other websites.
Ideally I'd prefer it to have a white finish, but an oak finish would also work. One rounded edge is required.
If anyone can advise on where to find something like that, or alternative solutions, I would be very grateful.
Cheers,
AC
I'm new to the forum so my apologies if I would have missed something obvious.
I'd like to build a custom desk with a length of 2400 mm with 4 legs on the corners, so to avoid it from bending under load I'd need the furniture panel to be at least 25 mm but preferably 30 mm thick.
I already saw panels like these at B&Q a few months ago, they were longer than 2400 mm, 600 mm wide, and 30 mm thick. Unfortunately, I can't find them on the B&Q website anymore, and also had no luck finding similar panels on other websites.
Ideally I'd prefer it to have a white finish, but an oak finish would also work. One rounded edge is required.
If anyone can advise on where to find something like that, or alternative solutions, I would be very grateful.
Cheers,
AC