Page 1 of 1
BLADDER PRESSURE IN EXPANSION TANK
Posted: Sun Nov 02, 2008 10:40 pm
by handy sandy
HI CAN ANY ONE OUT THERE TELL ME WHAT PRESSURE I SHOULD PUT IN THE BLADDER OF MY EXPANSION TANK :
Posted: Mon Nov 03, 2008 5:39 am
by Steve the gas
Hi Sandy,
1bar or 15 psi
Hth
Posted: Mon Nov 03, 2008 11:33 pm
by handy sandy
[quote="Steve the gas"]Hi Sandy,
1bar or 15 psi
Hth[/quote][b][color=darkblue][/color][size=18][/size]
HI STEVE THANKS FOR TAKEING THE TIME TO REPLY TO MY QUESTION I HAVE JUST REPLACED VALVE WITH GAUGE AT TOP OF PRESSURE VESSEL AS PRESSURE WAS DROPPING EVERY DAY AND PIPE THAT LEAD FROM VALVE TO OUTSIDE THE HOUSE WAS WET AS WELL AND THIS IS WHY I WAS LOOSING PRESSURE BUT I WONDER IF NEW VALVE IS FAULTY AS WELL AS IT IS STILL LOOSING PRESSURE AND PIPE IS NOW DAMP RATHER THAN SOAKING WET AND NOW HOLDS PRESSURE FOR ABOUT 3 DAYS COULD THERE BE ANY OTHER REASON FOR THIS PIPE BEING WET OTHER THAN VALVE LEAKING BEARING IN MIND I NEVER TOP UP HIGHER THAN 2.BAR WHEN TOPPING UP PRESSURE THANKS AGAIN SANDY[/b]