Page 1 of 1
adding a new radiator
Posted: Sun Jun 10, 2007 9:49 am
by rambo77
hi i want to add a new rad in my conservatory how do i find out if my combi bolier will be able to take it its a fairly new combi about 3yrs olds iv looked on the boiler for info but it all makes no sense to me
any advice would be great
thanks
Posted: Mon Jun 11, 2007 8:48 am
by wishiwascorgi
if u tell me what make and model of boiler you have and measure the lenth and depth of all your radiators i can work out how big a radiator can be installed. Also let me know which are single panel, double panel or p+.
Posted: Mon Jun 11, 2007 10:01 am
by rambo77
that would be a great help thankyou
my combi boiler is a BOSCH worcester 28CDI
the radiator size's are: 8 rads in total
2: 1000x600
1: 480x600
2: 400x600
1: 1440x450
2: 960x460
all rad's are single
im hoping to add a 1000x300 rad into a conservatory would rather fit a double but a single will do if need be what do you think?
kind regards
message for wishiwascorgi
Posted: Wed Jun 13, 2007 7:12 pm
by rambo77
hi there if you get a chance you was going to work out what rad i could add to to my central heating system iv posted the details you asked for in my last post
adding a rad
kind regardsthat would be a great help thankyou
my combi boiler is a BOSCH worcester 28CDI
the radiator size's are: 8 rads in total
2: 1000x600
1: 480x600
2: 400x600
1: 1440x450
2: 960x460
all rad's are single
im hoping to add a 1000x300 rad into a conservatory would rather fit a double but a single will do if need be what do you think?
kind regards
Posted: Fri Jun 15, 2007 1:11 am
by wishiwascorgi
Hi Rambo sorry for the delay in getting back to you i forgot that i asked for the dimensions and not many people actually come back to a post but here gos
Your boiler is the rsf (room Sealed Flue) I hope as you said it was the 28cdi this has an output on the central heating side of
9-24kW (30,700-82,000 Btu/hr)
The size of your radiators have a btu size of (give or take 10 btus)
2: 1000x600 3519 each total 7038
1: 480x600 1759
2: 400x600 1408
1: 1440x450 not sure but roughly 4500
2: 960x460 3021 each 6042
o==
you have just under 21000 btus used so the boiler should be sufficient as the radiator you want to hang is only 3737 btus
So long as the pipework is not too long the boiler should cope well enough.
Posted: Fri Jun 15, 2007 6:02 pm
by rambo77
hi there thanks very much for your reply thats a great help from the rad im planning to tap off from will be approx 3.5m away do you think this be ok
thanks again
Posted: Sat Jun 23, 2007 10:05 pm
by wishiwascorgi
that should be fine sorry for the delay in replying as i have been on holiday.