Wiring thermostat to extrator fan
Posted: Sat Mar 17, 2012 3:17 pm
Hi,
I've got a cupboard with an extractor fan, it helps extract heat from electrical equipment (amp/dvd etc).
Tthe fan takes mains 240v has an isolator switch.
I bought a robus rrf10-01 thermostat as it can do nomally open for cooling.
so i'm not sure how to wire the L and N from the isolator via the robus and into the fan.
robus instructions state terminal 2 for live and 4 for neutral when cooling.
so to restate problem, L and N come out of isolator and into fan, how do i wire the stat inbetween?
help greatfully recieved
thanks
stewart
I've got a cupboard with an extractor fan, it helps extract heat from electrical equipment (amp/dvd etc).
Tthe fan takes mains 240v has an isolator switch.
I bought a robus rrf10-01 thermostat as it can do nomally open for cooling.
so i'm not sure how to wire the L and N from the isolator via the robus and into the fan.
robus instructions state terminal 2 for live and 4 for neutral when cooling.
so to restate problem, L and N come out of isolator and into fan, how do i wire the stat inbetween?
help greatfully recieved
thanks
stewart