Page 1 of 1
painting a single skin wall
Posted: Mon Jan 19, 2009 12:27 pm
by dartmoorlizzie
Our porch has only single walls- no cavity - and consequently any paint quickly becomes discoloured and speckled with black mould. Are there any sealants I could try to stop this happening? Grateful for all ideas.
Posted: Mon Jan 19, 2009 10:55 pm
by stoneyboy
dartmoorlizzie,
Nothing will stay stuck to the inside of the walls if water is penetrating from the outside, also condensation will form because the walls are single skin - hence the mould.
end
Posted: Tue Jan 20, 2009 6:16 pm
by dartmoorlizzie
So demolish porch and rebuild with cavity? Hang the expense?
Posted: Wed Jan 21, 2009 6:11 pm
by stoneyboy
dartmoorlizzie,
Since its a porch you could build inner walls of aerated concrete blocks leaving a cavity between the inner and outer walls but your porch will then be about 30cm smaller.
end
Posted: Mon Jan 26, 2009 9:15 am
by TheDoctor5
Last year 64% of the questions asked in our forum were answered within our DIY project pages at
www.diydoctor.org.uk/projects.htm The project pages are now separated alphabetically and your answers are accompanied by diagrams and the ability to see, and buy, the tools and/or required to complete your project. Use our search box to look for your answer and save a great deal of time and money!