Valves Gummed up?
Drainage and wastage systems and plumbing help, advice and answers

2 posts   •   Page 1 of 1
omits
Apprentice
Apprentice
Posts: 19
Joined: Thu Aug 22, 2013 12:40 pm

Valves Gummed up?

by omits » Sun Apr 02, 2023 8:19 am

I have several water supply valves which don't turn off.

1 Two 50 gal tanks in loft with outlet 22mm valves (brass). When I turn them fully off (they go all the way) water still comes out of the bath tap (not mains). Is there a quick fix? I would need some sort of bung to stop the flow in both so i can undo them. Note both tank outlets feed to the same down feed so I can't just turn one off.

T-------X----|
|------------ to house
T-------X----|

2 There are two 15mm valves near my hot water tank. Both are stuck. Any ideas how to loosen them?

I have a very scaly water supply so I guess thats the problem.

stoneyboy
Project Manager
Project Manager
Posts: 6534
Joined: Wed Dec 10, 2008 6:44 pm

Re: Valves Gummed up?

by stoneyboy » Mon Apr 03, 2023 9:58 pm

Hi omits,
Try removing the handles and then using mole grips direct on the shaft. Keep rotating the shaft backwards and forwards to free it.
Regards S

2 posts   •   Page 1 of 1
It is currently Fri Nov 22, 2024 7:47 am