electrical trunking
Ask questions and find answers to many subjects relating to electrics and electrical work

5 posts   •   Page 1 of 1
rose
Ganger
Ganger
Posts: 90
Joined: Mon Sep 29, 2008 5:03 pm

electrical trunking

by rose » Fri Jan 30, 2009 1:59 pm

hi

can anyone tell me what kind of trunking should be used for the wiring of a house. this will then be embedded in the wall and plastered over.

also, if a piece of trunking has been damaged when hacking off plaster does this matter?
Can duct tape be wrapped around the damaged area and then replastered?

any advice welcome thanks

kbrownie
Project Manager
Project Manager
Posts: 1995
Joined: Mon Mar 05, 2007 9:36 pm

by kbrownie » Fri Jan 30, 2009 9:42 pm

Its not trunking you need to use, i'd use either oval conduit or protective channel.
The oval conduit will allow you still to pull cables through the channel will protect the cable when plastering.
KB

SparkyPaul
Apprentice
Apprentice
Posts: 18
Joined: Wed Jan 28, 2009 7:18 pm

by SparkyPaul » Sat Jan 31, 2009 12:29 am

Oval tubing is better
All it is for is to protect from the plasterers trowel damaging the cable Oval also helps if a cable has been damaged to pull another cable through without ripping the wall to bits

mattpark
Apprentice
Apprentice
Posts: 13
Joined: Thu Jan 15, 2009 10:05 pm

by mattpark » Sat Jan 31, 2009 9:24 pm

protective channelling is cheaper and the option id go for particularly if youve got loads to do. As previously stated conduit will allow you to pull/feed cable(s) through it in the future. But what are the chances of that being necessary ?

rose
Ganger
Ganger
Posts: 90
Joined: Mon Sep 29, 2008 5:03 pm

by rose » Sun Feb 08, 2009 5:11 pm

hi guys

thanks for all your comments
the conduit has been damaged do to heavy handed builder
Any suggestions?

5 posts   •   Page 1 of 1
It is currently Wed Nov 27, 2024 6:43 am