Page 1 of 1
Bathroom electrics
Posted: Thu May 07, 2009 1:32 am
by mikedb3
Can i fit a fused spur ( not wsitched ) 1.2m above my sink to supply my extractor fan
Posted: Thu May 07, 2009 11:28 am
by kbrownie
If you are a quailified registered electrician or have notifed your local building controls of the work you intend to carry out you can, providing it complies with regulation related to bathrooms in BS7671:2008, that means it is outside the zones that this accessory is not permitted to be installed.
KB
Posted: Thu May 07, 2009 5:02 pm
by moggy1968
does the room contain a bath or a shower?
Posted: Thu May 07, 2009 6:44 pm
by kbrownie
Hi Andy,
mikedb3's
subject matter said Bathroom electrics, so I assumed it would have at least have a bath in it?
KB
Bathroom electrics
Posted: Fri May 08, 2009 12:39 am
by mikedb3
[quote="kbrownie"]Hi Andy,
mikedb3's
subject matter said Bathroom electrics, so I assumed it would have at least have a bath in it?
KB[/quote]
There is only a shower cubicle in the room now , the spur will be 1.4 Mts above the sink and form what i can see about the new regs thats out of zone 2
Posted: Fri May 08, 2009 12:41 am
by mikedb3
There is now only a shower cubicle in the room and the spur will be 1.4mts above the sink , from what i can make out with the new regs its outside zone 2
Posted: Fri May 08, 2009 12:49 pm
by kbrownie
your extractor fan will also need to comply to regulations, remember it is notifiable work, if you are not employing part p registered installer.
KB