Page 1 of 1

Socket Height

Posted: Mon Jun 25, 2007 2:41 pm
by misterg
Hi

I am moving some existing sockets off the skirting boards in a bedroom, and have just read a magazine article stating that they must be located between 450 mm and 1200mm.

Or is this only applicable to new builds?

My DIY manual, written in 2006 says this is optional.

I was planning to put them at about 350mm, to match other rooms.

Part M is a bit ambigous, as it says "should" not "must".
Can anyone shed any light on this?

Cheers

MisterG

Re: Socket Height

Posted: Tue Jun 26, 2007 4:58 pm
by BLAKEY1963
[quote="misterg"]Hi

I am moving some existing sockets off the skirting boards in a bedroom, and have just read a magazine article stating that they must be located between 450 mm and 1200mm.

Or is this only applicable to new builds?

My DIY manual, written in 2006 says this is optional.

I was planning to put them at about 350mm, to match other rooms.

Part M is a bit ambigous, as it says "should" not "must".
Can anyone shed any light on this?



Cheers

MisterG[/quote]

MISTERG
CORRECT ! REGS DO SAY 450 MM2 FOR SOCKET OUTLETS
BLAKEY1963

Posted: Tue Jun 26, 2007 5:15 pm
by sparx
Hi Mister G, only new/substantial rewire need comply as long as 'no worse than before' ie same as others OK,
regards SPARX

Posted: Sat Jun 30, 2007 2:28 pm
by misterg
Great thanks.

As I am raising from about 30mm to 350mm, it will certainly be no worse than before.

Cheers

G