Page 1 of 1
omg how many wires do i need !!!
Posted: Thu Jul 05, 2007 9:16 pm
by burgeuk1
ok so ive finished work at 5 and decided to fit a light, no problem so far ,,
then i take old rose off and find i have 4 sets of wires coming down .
Im trying to fit halogen light from a rose , any 1 elp me at all
i currently have 4 sets of wires coming in and only 4 places to put em.
Re: omg how many wires do i need !!!
Posted: Fri Jul 06, 2007 7:25 pm
by BLAKEY1963
[quote="burgeuk1"]ok so ive finished work at 5 and decided to fit a light, no problem so far ,,
then i take old rose off and find i have 4 sets of wires coming down .
Im trying to fit halogen light from a rose , any 1 elp me at all
i currently have 4 sets of wires coming in and only 4 places to put em.[/quote]
BURGEUK
LOOK AT DOC S LIGHTING PROJECT.
BLAKEY1963
Posted: Fri Jul 06, 2007 9:30 pm
by sparx
Hi BuergeUk1,
it is normal to have 3 sets of wires @ a light , the extra one could be to a second light in same room switched with first one or to wall lights etc, so more info helpful, as blakey says projects forum deals with normal loop in wiring but the main thing is to note the 1 or 2 wires going to your existing lights Live flex Brown this/these is/are switch lives to fitting and need marking as such with tape /sleeving (brown).
You will find 3/4 lives red or browns together which go to spare connector & do not connect to light in any way they are L in L out to next light, L to sw. if 4th connected there then it goes to power something else (fan, wall light ).
the black/blues are looped Neutrals, in out to next fitting & go to fitting N Blue .
the remaining Black/blue which should be marked with tape/sleeving as sw. Live to your fitting, have a look and come back with more info please , regards SPARX