Page 1 of 1

extractor fan quickie

Posted: Mon Jul 16, 2007 8:21 pm
by lpdodge
is it possible to run an extractor fan from the ceiling rose instead of at the light switch and will the fan have to be fused

Re: extractor fan quickie

Posted: Tue Jul 17, 2007 11:07 pm
by BLAKEY1963
[quote="lpdodge"]is it possible to run an extractor fan from the ceiling rose instead of at the light switch and will the fan have to be fused[/quote]

IPDODGE
FAN CAN BE RUN FROM LIGHTING ROSE , TO PICK UP
LOOPFEED, SW WIRE, AND NEUTRAL ( AND OF COURSE EARTH ) . USE SAME SIZE CABLE , WOULDNT SAY IT HAD TO FUSED,
BUT A 3 POLE FAN ISOLATOR MUST BE FITTED TO ISOLATE FAN FOR MAINTAINANCE . IF THIS WORK IN KITCHEN OR BATHROOM THEN YOU
ARE ALTERING CIRCUIT SO IT BECOMES NOTIFIABLE PART P WORK.
BLAKEY1963