Page 1 of 1
Ceiling Lamp too Low and Exposing Hole and Wires After Fitting
Posted: Tue Oct 11, 2016 2:22 pm
by shaunson
My dad, an electrician recently fitted this pendant lamp to my ceiling. He struggled getting the top of the fitting to touch the ceiling, so it is hanging too low, exposing the hole in the ceiling and the wires. The lamp stays in place, even when pulling the strings. I have heard that there is some sort of clip that would help the lamp stay close to the ceiling, so that the hole is not visible. Can anyone help?
Re: Ceiling Lamp too Low and Exposing Hole and Wires After Fitting
Posted: Tue Oct 11, 2016 6:54 pm
by tileclipproman
there should have been one in with the kit that came with the light,ask dad to fix it or he can forget fathers day
Re: Ceiling Lamp too Low and Exposing Hole and Wires After Fitting
Posted: Tue Oct 11, 2016 7:17 pm
by kbrownie
Looks like an Ikea special.
Normally on these type of slide up covers, you would have a small grub screw that is on the cover that nips/grabs the flex.
Ikea should not sell unsafe lamps where live conductor are left exposed and your dad being an electrician should know that this has not been left safe!