Replacing 2 way Switch on Landing
Posted: Thu Aug 23, 2007 8:52 pm
The old two way switch has a broken rocker and would like to replace the switch with a new one... bought from Wickes.
The wiring of old switch is as follows:
cable 1 consisting of Red to Top Left Common
Black to bottom centre
Cable 2 consisting of Black to top centre
Red to top right (2) 1 way
Cable 3 consisting of Blue to top centre
Yellow to top right (2) 1 way
Red to bottom right Common
How do i connect these cables to the new switch which has the following
layout on the back:
Top are Com for both switches
Below are 1 way and 2 way on both switches
Can't find a new switch like to old one for connecting the wires up...
any help greatly appreciated
The wiring of old switch is as follows:
cable 1 consisting of Red to Top Left Common
Black to bottom centre
Cable 2 consisting of Black to top centre
Red to top right (2) 1 way
Cable 3 consisting of Blue to top centre
Yellow to top right (2) 1 way
Red to bottom right Common
How do i connect these cables to the new switch which has the following
layout on the back:
Top are Com for both switches
Below are 1 way and 2 way on both switches
Can't find a new switch like to old one for connecting the wires up...
any help greatly appreciated