Page 1 of 1
Replace Ceiling Rose With new Light That Doesn't Fit
Posted: Mon Oct 15, 2018 2:11 pm
by Markstev27
Hi
We have bought a new ceiling light and need to replace the existing ceiling rose with the light
There is an existing light on the ceiling already that we installed 10 years ago but the new light cannot fit onto the ceiling rose
Whats the easiest way to replace it
Thanks
Re: Replace Ceiling Rose With new Light That Doesn't Fit
Posted: Mon Oct 15, 2018 5:19 pm
by collectors
It very much depends on the amount of cables at that ceiling rose. If possible, unscrew the ceiling rose front & take a picture of the cables inside. But it sounds like you will have to remove this rose to install the new light.
Re: Replace Ceiling Rose With new Light That Doesn't Fit
Posted: Tue Oct 16, 2018 7:34 am
by Markstev27
collectors wrote:It very much depends on the amount of cables at that ceiling rose. If possible, unscrew the ceiling rose front & take a picture of the cables inside. But it sounds like you will have to remove this rose to install the new light.
This is a picture of the rose
Re: Replace Ceiling Rose With new Light That Doesn't Fit
Posted: Tue Oct 16, 2018 8:40 am
by collectors
Hi, no picture showing. Many others have had the same thing when showing pictures. I don't know what size, but i think the forum will only except images under a certain KB. But in saying this, there are many things that don't work on this forum & its a real pain. Thats apart for having to wait up to 24 hours to get replies from post because they are monitored. I thought a forum meant open discussion??.
But please try again with a reduced image
Re: Replace Ceiling Rose With new Light That Doesn't Fit
Posted: Tue Oct 16, 2018 11:42 am
by Markstev27
For some reason the image wasn't uploading. This is the current ceiling rose and we need to take it out and install the new light
Re: Replace Ceiling Rose With new Light That Doesn't Fit
Posted: Tue Oct 16, 2018 10:07 pm
by Mr White
Mark the cables with an indelible pen, take a couple of clear in focus pictures, then use "Wago connectors" (Get them from screwfix / electrical wholesaler) and use those instead of a ceiling rose, and if you put them in a wago box, you can poke the lot up into the ceiling, so you will only be left with a 3 core flex (That you purchased with the wagos) that you connect your new light to.