How to find whether my Triton hand-wash T30i heater element is working (or broken) using a Multimeter Ask questions and find answers to many subjects relating to electrics and electrical work

[EamonnX1]

Triton T30i hand wash. I want to check whether the heater element is working or broken, using a Multimeter.
I attach a photo of the 'Can and Element assembly' which reveal the contact points.
See the photo below
I also give you a link to the repair Diagram for this model:
http://www.free-instruction-manuals.com ... 304947.pdf

[Mr White]

..........and your question is?

[EamonnX1]

I sorted it out. I had a can and element assembly from an old Triton which I knew was working and using the ‘continuity’ function compared the results with the Triton I wanted to fix . I discovered that the heating element was broken

[ericmark]

Ohm's law usually works, 1 kW heating element with 230 volt supply is 53Ω but there are a few exceptions.