DIY Doctor UK DIY Forums

hello first post here
can some help please
just bought a new oven and grill not realising it will not run off a 3 pin socket
so my new oven is a 4,4kw
in my last house I ran a 10mm shower cable as my shower was 9kw and installed a 45amp fuse at the circuit board my question is can I run a 6mm cable and install a 40amp fuse at circuit board ?
I enclose photo of oven and fuse board
also any idea where I can buy HAGER fuse from
thank you paul

hope this phot is better !

40mcb or 45 mcb

You will need to test and verify that all is well, it is not just a case of switch on and if it doesn't go bang it must be ok
In this case you are going to need the services of an electrician.