Page 1 of 1

Replacing Light Fitting

Posted: Sun Oct 14, 2007 2:48 pm
by jamesxmx
Removed Ceiling rose as per instruction

New light has a 4 way terminal block with light wired to block as Live , Neutral, Earth , Spare.

There are 2 cables from ceiling , one the Mains , other is switch - both standard 3 core.

I wired the mains cable to the terminal block, matching Live , Neutral, Earth

When I wire the cable from switch on same matching , it blows fuse.

Advice would be apprecaited.

Thanks
James

Re: Replacing Light Fitting

Posted: Sun Oct 14, 2007 6:37 pm
by BLAKEY1963
[quote="jamesxmx"]Removed Ceiling rose as per instruction

New light has a 4 way terminal block with light wired to block as Live , Neutral, Earth , Spare.

There are 2 cables from ceiling , one the Mains , other is switch - both standard 3 core.

I wired the mains cable to the terminal block, matching Live , Neutral, Earth

When I wire the cable from switch on same matching , it blows fuse.

Jice would be apprecaited.

Thanks
James[/quote]

JAMES XMX

SOUNDS LIKE LIVE AND NEUTRAL DEAD SHORT ACROSS
SWITCH , BUT NEED MORE INFO ?
HAVE U LOOKED AT DOC S PROJECT SECTION ON LIGHTING.
HAVE U GOT 2 RED AND BLACK CABLES ?

BLAKEY1963