Page 1 of 1

Opinions on EPDM Membrane Roofing Work

Posted: Fri Sep 20, 2019 9:30 pm
by abedegno
Just employed a roofer to do some remedial work on my house, everything looks okay IMHOI except the rubber membrane he used to replace some lead flashing.

Am being picky with this:
abe20a75-a6fc-4533-8191-4256221296d0 copy.jpg

40185fc7-1cc8-4cb8-9cc3-577ecebb51a7 copy.jpg


There's also a purple glue dried onto the fascia, I can only assume this was used to glue down the EPDM?
8be72934-9d40-48db-8002-7c756d7bca7c copy.jpg


Is this an acceptable finish?

Thanks

Abe

Re: Opinions on EPDM Membrane Roofing Work

Posted: Wed Dec 18, 2019 2:20 pm
by domward
No this looks terrible. Looks like he should have smoothed the surface before laying and then used Lead Alternative for the flashing

Re: Opinions on EPDM Membrane Roofing Work

Posted: Fri Sep 04, 2020 4:22 pm
by AAC Waterproofing
It is normal for EPDM rubber to bubble once it has been applied correctly, this is due to gas-forming after the glue dries, I would be questioning the finish though.