Page 1 of 1
Levelling concrete floor for thermal boards and underfloor heating
Posted: Mon Nov 09, 2020 9:56 am
by Jambi_81
I'm just about to level a concrete floor ready for thermal boards for underfloor heating. After taking up the old tile floor there's a number of holes around 3-4cm deep roughly 5 -10cm diameter. I've got levelling compound that can go this deep, but should I patch them with something else first. Or should I fill those with levelling compound first, let dry then do the whole floor?
Re: Levelling concrete floor for thermal boards and underfloor heating
Posted: Mon Nov 09, 2020 10:59 pm
by stoneyboy
Hi jambi_81
Fill the holes first and let it set, then screed the whole floor.
Regards S
Re: Levelling concrete floor for thermal boards and underfloor heating
Posted: Mon Nov 09, 2020 11:40 pm
by Jambi_81
stoneyboy wrote:Hi jambi_81
Fill the holes first and let it set, then screed the whole floor.
Regards S
Thanks for the reply. Fill the holes with levelling compound?
Re: Levelling concrete floor for thermal boards and underfloor heating
Posted: Tue Nov 10, 2020 10:34 pm
by stoneyboy
Hi jambi_81
Not really worth it just use a cement/sharp sand mix.
Regards S
Re: Levelling concrete floor for thermal boards and underfloor heating
Posted: Wed Nov 11, 2020 9:38 am
by Jambi_81
stoneyboy wrote:Hi jambi_81
Not really worth it just use a cement/sharp sand mix.
Regards S
Thanks