Tidying up / replacing strip wooden floor after removing layers of laminate and vinyl
Help, advice, information, answers and tips on all types of flooring from laminate and carpet to timber and vinyl

2 posts   •   Page 1 of 1
Oboe74
Labourer
Labourer
Posts: 4
Joined: Sat Jan 23, 2021 2:29 pm

Tidying up / replacing strip wooden floor after removing layers of laminate and vinyl

by Oboe74 » Sat Jan 23, 2021 3:22 pm

Hi, about 2 years ago I removed 2 decades of vinyl and laminate in my dining area to reveal some dirty but solid looking floor boards. I sanded them down at the same time as installing a new kitchen, then neglected them for a couple of years. Now they are stained again, some have holes, and some have worn away where woodworm damage has been trodden on (see pics).

I am looking for advice on whether I can tidy them up, or just replace the whole lot to look at close as possible to the adjoining living room (whose floor boards look good - see pics). One issue, is I tiled over the last joist at the edge of the kitchen.

Any advice greatly appreciated!

Owen

stoneyboy
Project Manager
Project Manager
Posts: 6534
Joined: Wed Dec 10, 2008 6:44 pm

Re: Tidying up / replacing strip wooden floor after removing layers of laminate and vinyl

by stoneyboy » Sun Jan 24, 2021 10:01 pm

Hi oboe74
Without the pictures it is not possible to give advice.
Regards S

2 posts   •   Page 1 of 1
It is currently Thu Nov 21, 2024 10:36 pm