Taper edge or straight ege plasterboard
Posted: Sat Jan 17, 2009 6:30 pm
by graemer57
Am building a new extension (block and render). Shell is up, windows in and everything is roofed and waterproof. Intend to use dot and dab plasterboard and then get in a pro to skim over ENTIRE finished surface as is a 7m wall and want best finish possible. Am getting conflicting advice on whether to use normal plasterboard or taper edge board, even though don't intend to just tape and skim only the joints but skim the whole surface. Anyone have a recommendation based on experience?
Posted: Sat Jan 17, 2009 7:05 pm
by kbrownie
If your plastering whole walls, you can use either, the norm would be to stick with square edge.
Taper edged boards are generally for dry lining and ames taping the joints.
KB
Posted: Tue Jan 27, 2009 2:21 pm
by TheDoctor5
Last year 64% of the questions asked in our forum were answered within our DIY project pages at
www.diydoctor.org.uk/projects.htm The project pages are now separated alphabetically and your answers are accompanied by diagrams and the ability to see, and buy, the tools and/or required to complete your project. Use our search box to look for your answer and save a great deal of time and money!