Bleed valve
Posted: Tue Oct 07, 2008 8:57 am
by Caesar
Whats the best way to remove a worn (rounded) bleed valve from a radiator ?
Posted: Tue Oct 07, 2008 9:01 am
by TheDoctor4
Hi
Have you had a look at the DIY Projects area:
https://www.diydoctor.org.uk/projects.htm particularly the project titles "Jammed / stuck water valves". This may be of some use to you.
Regards
Posted: Tue Oct 07, 2008 7:39 pm
by nitro23456
If you have a decent radiator you can remove the whole bleed nipple assembly from the raidator and replace with the same using a spanner. Empty radiator first.
If you have one of the rubbish radiators with the bleed nipple on the rear and its welded into the actual radiator you will have to replace the radiator - I had to do this last month.
I have read all sorts of rubbish about making a new hole with a self-tapping screw and PTFE tape... dont bother.
Hopefully you will have a decent radiator with the assembly on one side and a blank on the other.