Page 1 of 1
Very Low Pressure from Cold pipes to toilets and hand basins
Posted: Wed Jan 14, 2009 4:08 pm
by Biggs 2009
I have just moved into a house where the cold water pressure is very low at the taps and also when filling up the Cisterns. Ive repressurised the system and it came back with good pressure. I left it for a few days and the pressure is now very low. does any one know what could be wrong? The Hot taps pressure is fine.
Posted: Wed Jan 14, 2009 7:09 pm
by Stelf
Hi
Does this low pressure on the cold taps include the tap to the kitchen sink?
If this is the case check that your main stopcock is fully on. Best to ensure it is fully on then turn back half a turn. You should also regularly check the main stopcock turns off properly (every few months) as it can seize up if neglected and you should also turn off if you leave the house empty for any length of time, holidays for instance.
Best wishes.
Posted: Wed Jan 14, 2009 11:18 pm
by swidders
could be the main stopcock has developed a fault in which case call in a professional to repair/replace it.
Posted: Thu Jan 29, 2009 1:39 pm
by TheDoctor5
If you type the key words of your question into our search box to the left of the site you may find the answer is already posted or is in the DIY projects section of the website. Every post goes through a monitoring process and using the search box may speed up your answer.