Page 1 of 1

Freeestanding showers?

Posted: Sun Jan 18, 2009 5:21 pm
by Rastanking
Hi everyone,

I am looking to put a freestanding shower in my very small bathroom, when I say freestanding what I mean is I only have 1 wall large enough to put the shower against.

I have seen the D shaped enclosures but these do not look large enough, does anyone know any suppliers who can supply rectangular/square enclosure that only fix to 1 wall.

Any help would be appreciated

Thanks in advance

Andy

Posted: Sun Jan 18, 2009 8:26 pm
by bobplum
hi
can you not make it a wet room?
bob

Posted: Sun Jan 18, 2009 10:47 pm
by swidders
I assume you mean that you will have 3 glass sides. In this case you need to get one door and two side panels (these can be fitted to either side since they just slot on and screw into each other). You can buy these separately at most places - b&q is a starting point, and can be got in a variety of sizes to suit whatever tray you're getting.

After that it's a matter of cost - cheapest i've used lately is from plumbworld.co.uk but you'll have to contact them direct to get them to order an extra side panel from the manufacturers.

Posted: Sun Jan 18, 2009 11:23 pm
by plumbbob
As Swidders says, buy a tray then panels to suit.

Sizes can be 700, 760, 800, 900, 1000. 1200, 1400mm wide by various depths between 760 and 900mm.

Posted: Mon Jan 19, 2009 8:25 pm
by Rastanking
Thanks everyone for all your help I will look into it.

Many thanks

Andy

Posted: Thu Jan 29, 2009 2:14 pm
by TheDoctor5
If you type the key words of your question into our search box to the left of the site you may find the answer is already posted or is in the DIY projects section of the website. Every post goes through a monitoring process and using the search box may speed up your answer.