Page 1 of 1

Self cutting tap easy plumb for appliance

Posted: Mon May 21, 2007 12:00 am
by greengrass
First time user of the self cutting appliance taps.
I've firmly secured the clamp to the pipe ready to take the combined tap and cutter.
Although the instruction do not mention it, would it be adviseable to wrap PTFE tape around the tap thread before chancing my arm that when screwed in it wont start weep leaking.

Posted: Wed May 23, 2007 7:48 am
by thedoctor
PTFE will certainly not do it any harm Greengrass.

Re: Self cutting tap easy plumb for appliance

Posted: Wed May 23, 2007 11:45 am
by greengrass
[quote="greengrass"]First time user of the self cutting appliance taps.
I've firmly secured the clamp to the pipe ready to take the combined tap and cutter.
Although the instruction do not mention it, would it be adviseable to wrap PTFE tape around the tap thread before chancing my arm that when screwed in it wont start weep leaking.[/quote]



Thanks for your info Doc done it and no leaks problem now is the b.....
hose screw fit keeps poping off have to try a new one see how it goes if no good I'll be b.....ng Wickes to pass on my b....ng to the manufacturer.

Bob