Page 1 of 1
hot wate cylinder
Posted: Tue May 04, 2010 5:26 pm
by beth
hi can any one help was wondering to i actually have to replace my hot water cylinder with another or can i have a water heater reason for asking this is my water cylinder has a slight leek
Posted: Thu May 06, 2010 10:38 pm
by stoneyboy
beth,
If you are suggesting replacing the HWC with an instantaneous water heater I would not recommend it.
end
Posted: Fri May 07, 2010 2:34 pm
by Dave From Leeds
beth,
Chances are that you'll need a new cylinder. Mine sprang a leak a few years ago. It was weeping from the seam around the top. I managed to seal it for a while using a product called Chemical Metal, made by "Plastic Padding". I say for a while; it started leaking again after between 9 and 12 months so I changed the cylinder.
To seal it, I turned off the mains water, ran some hot water out of the system to get the level in the cylinder below the leak, dried it off then applied the product. Let it dry for an hour & turned the water back on.