Page 1 of 1
Speedfit Flexi Tap Connectors
Posted: Wed Jul 20, 2011 11:07 am
by shadow_scoob
I am looking to purchase some speedfit flexi tap connectors but I can only see 15mm to 1/2". Does this mean that the tap connector ends are always 1/2", I just expected the tap end to be 15mm as well.
Thanks
Steve
Posted: Wed Jul 20, 2011 10:33 pm
by plastic_man77
@ shadow_scoob
If you are looking to connect to a basin tap, then the connection will be 1/2" at the tap and 15mm at the pipework.
Historically, the thread is an imperial measurement and the pipe is now metric.
If you are connecting to a bath tap, the tap connector will be 3/4".
Posted: Thu Jul 21, 2011 4:09 pm
by Barry Bunsen
Hi
Sink and basin taps are nearly always half inch and bath taps three quarter inch.