DIY Doctor UK DIY Forums

Hi
I recently had by boiler serviced and a filter fitted to the feed to collect the gunge that can build up in the pipework. Since this was done I cannot get two of the downstairs radiators( kitchen and dowstairs toilet) to work without switching off one of the upstairs ones! Ive tried bleeding the rads and increasing the water pressure intake to the boiler from 1.5 to 2 bar, but nothing has worked.
Any ideas gratefully accepted!!

There's normally a filter in the flow pipe from the boiler. Check this is clear, as another filter has been fitted this is another restriction in the system. Clean the boiler filter and balance the radiators and this should solve the problem.

htg

Thanks htg.
Will do
Ian