Fitting Double Check Valve When Installing Outside Tap
Posted: Mon Jun 19, 2017 11:03 pm
Hi Guys,
When fitting an outside tap (HOT), I'm assuming you still need to fit a double check valve? - question is, will there be adequate pressure to open the valve?
I'm guessing this wouldn't be a problem for a pumped combi system? but what about a gravity fed system?
thanks in advance...
When fitting an outside tap (HOT), I'm assuming you still need to fit a double check valve? - question is, will there be adequate pressure to open the valve?
I'm guessing this wouldn't be a problem for a pumped combi system? but what about a gravity fed system?
thanks in advance...