Shower Pole Needs Replacing but 600cm Between Fixtures
Posted: Sun Nov 26, 2017 10:35 am
Hi,
this morning my son broke the fitting which the shower head goes into.
I looked at replacing it but the "pole" is flat rather then round - this means that most replacements won't work.
There's no details of manufacturer on the reverse.
So I thought - replace the pole - but it's 60cm between the fixtures - which seems to be greater than most poles.
Any one know if there's any suitable pole - I do not want to put a smaller one up as this will leave holes on the tiles.
PS I usually crack tiles when I try to drill through them so would prefer using existing fitting holes.
Any help would be appreciated..
this morning my son broke the fitting which the shower head goes into.
I looked at replacing it but the "pole" is flat rather then round - this means that most replacements won't work.
There's no details of manufacturer on the reverse.
So I thought - replace the pole - but it's 60cm between the fixtures - which seems to be greater than most poles.
Any one know if there's any suitable pole - I do not want to put a smaller one up as this will leave holes on the tiles.
PS I usually crack tiles when I try to drill through them so would prefer using existing fitting holes.
Any help would be appreciated..