Page 1 of 1
How to Change a Cartridge in a Sink Tap but Cannot Access Tap?
Posted: Sun Mar 10, 2019 7:38 am
by R.Kondapalli
Hi ya, first time post so please bear with me. I am a new diy'er eager to learn. I noticed a kitchen tap dripping and going through some posts looks like change of washer would fix it. However, this tap looks to be different to all other taps I have seen and there is no screw to undo and open the tap.
I have attached the photo. Please could you help me by advising how to open? Any help is much appreciated
Re: How to Change a Cartridge in a Sink Tap but Cannot Access Tap?
Posted: Mon Mar 11, 2019 9:07 pm
by plumbbob
Two possibilities.
One, a screw is hidden under the red/blue mark which can be prised out.
Two, the levers can be removed by being unscrewed. This will reveal a tiny allen screw.
Oh, and these taps do not use washers. They are ceramic discs and only available after some research. Check they are not still under warranty.
Re: How to Change a Cartridge in a Sink Tap but Cannot Access Tap?
Posted: Tue Mar 12, 2019 9:14 pm
by R.Kondapalli
Thanks for your reply Plumbbob.
No red/blue mark and it all looks sealed. So, will be trying out option 2 tomorrow.
Excellent point about ceramic discs..I believe I have to clear the lime scale for these? Recently bought this house so dont know of any warranty.
Re: How to Change a Cartridge in a Sink Tap but Cannot Access Tap?
Posted: Wed Mar 13, 2019 7:37 pm
by R.Kondapalli
Plumbbob, As you have suggested, it appears to be, the solution is option 2 I.e., unscrewing lever bar.
However, Its very tight when I try to unscrew with hand. Before I try it harder using a tool, may sound dumb but can I check, I believe I turn the lever bar anti clock wise to open?
It looks like I have the same tap as in this post
how-access-kitchen-tap-s-cartridge-washer-t22662.htmlThanks