Mira Jump 9.5kw but no Water Flow
Posted: Sat Jun 08, 2019 2:45 pm
Looking for a bit of advice my shower just stopped working.
Power to it is fine
Mains water fine up to the shower
Press the button nothing happens
So I had a look myself tested the solenoid valve which was fine. Changed the solenoid any way.
Just did a general strip down couldn’t see anything obvious plunger looked okay, filter and hose not blocked
Rebuilt and shower worked turned it back off left for 5 minutes shower not working any more..
I am stuck where to look next anyone come across anything like this before?
Cheers
Power to it is fine
Mains water fine up to the shower
Press the button nothing happens
So I had a look myself tested the solenoid valve which was fine. Changed the solenoid any way.
Just did a general strip down couldn’t see anything obvious plunger looked okay, filter and hose not blocked
Rebuilt and shower worked turned it back off left for 5 minutes shower not working any more..
I am stuck where to look next anyone come across anything like this before?
Cheers