Page 1 of 1
Connecting two waste pipes to 40mm waste trap
Posted: Mon Dec 14, 2020 7:51 pm
by Schrodingers Cat
Hi. I have absolutely no idea what I'm doing so please be patient! Our washing machine waste hose is connected to the waste trap under the sink via a single spigot. The spigot is screwed to the 40mm waste pipe (the waste connector pipe itself is threaded and not a standpipe). We have just got a dishwasher and need to connect the waste pipe so I need an adaptor with a double spigot, but they all seem to be designed for a standpipe and not a threaded connection. Sorry if that was a bit rambling, but like I said, I have no idea. Any help would be appreciated. Thanks.
Re: Connecting two waste pipes to 40mm waste trap
Posted: Tue Dec 15, 2020 10:39 pm
by stoneyboy
Hi schrodingers cat
You will have to replace the trap with one with two spigots, McAlpine market one.
Regards S
Re: Connecting two waste pipes to 40mm waste trap
Posted: Wed Dec 16, 2020 7:28 am
by Schrodingers Cat
Ok. Thanks for your help
Re: Connecting two waste pipes to 40mm waste trap
Posted: Wed Dec 16, 2020 7:44 am
by Schrodingers Cat
Are the traps a standard size? If I buy one will I have to cut it to size??
Re: Connecting two waste pipes to 40mm waste trap
Posted: Thu Dec 17, 2020 8:22 pm
by stoneyboy
Hi schrodingers cat
1 1/2" traps are a standard diameter but the height may be different.
Regards S
Re: Connecting two waste pipes to 40mm waste trap
Posted: Thu Dec 17, 2020 8:29 pm
by Schrodingers Cat
Ok. Thanks for your help