Page 1 of 1
how to cut scaffolding
Posted: Thu Apr 09, 2009 3:35 pm
by meggan
I have two scaffold post as line poles for the washing, they are cemented deep in the ground and now I would like to take them down and the only way to do this is to cut them down.
Can anyone tell me how to do this and with what tools . Meggan :lol:
Posted: Thu Apr 09, 2009 9:16 pm
by rosebery
Posted: Sun Apr 12, 2009 2:39 pm
by wws4029
You could also use a hacksaw, but you will need a lot of elbow grease.
Also if you are going for the above option shop around as for just this application the above mentioned tool would be very expensive ( however it is a top quality item)
http://www.awin1.com/awclick.php?mid=12 ... inder-230V
this is from same supplier but much cheaper!
Posted: Sun Apr 12, 2009 10:44 pm
by rosebery
Oh goodness me! Surely this is a hire job or borrow someone who's got one.
Posted: Tue Apr 21, 2009 1:59 pm
by ocean
Surely a spade is the answer, why do u want to cut them down. Doubt the concreted in that deep. Bet its no more than 9-12 inches - dig around it and drag it out - probably less work than a hack saw and using a cutter sounds like over kill to me. I suppose if the set into a concrete path thats different - id hire an angle grinder - easier to get them flush to the path than a hack saw.