Page 1 of 1
Light switches
Posted: Tue Nov 18, 2008 8:31 am
by jamesdaniel
I`m trying to change a light switch over to a dimmer switch but the current wires are all red so i`m not sure which is which. Any help would be much appreciated.
Posted: Tue Nov 18, 2008 10:48 am
by plumbbob
Before you remove the wires from the old switch, note which holes they go in to. Each contact will be marked such as "Com" or "Common", "1 way" "1" etc. Mark the common wire by wrapping a bit of sticky tape around it to avoid mixing it with the other/s. Write down what goes where if you think you may forget.
Posted: Sat Nov 22, 2008 2:51 am
by ericmark
If you have two wires it should not matter. If you are using a two way switching unit then as long as common is moved to common on two way unit it should work OK.
Eric
Posted: Tue Jan 20, 2009 9:42 am
by TheDoctor5
Last year 64% of the questions asked in our forum were answered within our DIY project pages at
www.diydoctor.org.uk/projects.htm The project pages are now separated alphabetically and your answers are accompanied by diagrams and the ability to see, and buy, the tools and/or required to complete your project. Use our search box to look for your answer and save a great deal of time and money!